Click image to view full size image
Description:
explosion-proof light1, 40-50W 100-300V
2, OEM
HB 40W50W induction lamp for explosion-proof light
Type: HB-FB002
Category: Explosion-proof light
Size: 300x260X265 300x260X275
Lamp source: HB induction lamp
Power: 50W
IP grade: IP65
Material: Lamp fixture die-casting , fashionable and elegantsurface.
Applicable Places: Chemical, refinery.
Feature
1, Lamp fixture are eplosion-proof and dust explosion-proof,suitable for the explosive dangerous site.
2, Lamp fixture die-casting , fashionable and elegantsurface.
3, Polyester spray surface and dust resistant.
4, Lamp fixture designed with two cavities, lamp source and lampbase are separated .
5, Cable sealed in the inner part to avoid the twist of wire. Innerpart use rubber seal and make sure the resistant of water proof.
6, installation of wall mounted and ring hanger type suitable forhanging and wall mounted and ceiling installation .
HB induction lamp-Technical specification
1.The main frequency output is210KHZ
2.Power frequency is50/60HZ
3.Passed the standard of EMC Eectromagnetic Radiation test and EMIConduction Test
4.Passed one million times switch on-off test
5.The distance between ballast and tube should be less than10meters
6.With the standard of GB19510.4-2009, GB19510.1-2009,GB17743-2007, GB17625.1-2003and GB/T15144-2009, QB/T2871-2007
7.Wide Voltage, overcurrent and overvoltage protection;
8.Ten years manufacture demand and theoretical design
9.Provide five years quality warranty
Working environment temperature: -35°C-70°C
Working voltage range: 1, DC 12V 24V 36V voltagerange is -25%
2, AC 120V 220V 277V 347V 480V voltage range: -15%
HB 40W 50W induction lamp for explosion-proof light
